Puerto Rico Professional Engineer License Renewal Requirements

Pressure vessels are a key component of many processing facilities. Nuclear plants, paper mills, refineries, and natural gas processing plants all depend on pressure vessels to process a product. It is often desired to assess or extend the remaining service life of these pressure vessels by performing an inspection and engineering evaluation. Pressure, thickness, and structural reinforcement calculations are completed to determine an estimated corrosion rate and remaining life. This PDH course for professional engineer license renewal will address the application of various nondestructive inspection techniques to facilitate pressure vessel suitability for service evaluations. A combination of direct and remote visual inspection, dye penetrant, dry magnetic particle, wet fluorescent magnetic particle, acoustic emission, hardness testing, and various ultrasonic thickness inspections are typically used to complete the evaluation. The primary focus of this online PE professional development course will be on the application of visual inspection supplemented by a variety of ultrasonic inspection techniques.

In this online professional engineer license renewal PDH course, we examined key features of flood control and bank protection projects that worked over time and a number of those that faced challenges during their long life. Suggestions for improvement were made for many of the problems encountered. This PE continuing education course highlights the best lessons learned from many floodwater engineering projects across the southwest US.

This Professional Engineer license renewal PDH course introduces the principles of water chemistry, physical, chemical, biological, and radiological characteristics of water, reaction kinetics, coagulation/flocculation, softening, mixing and flocculation, sedimentation, filtration, disinfection, adsorption, and water plant waste management.

Wastewater has historically been considered nuisance to be discarded in the cheapest, least offensive manner possible. This PE license renewal PDH course introduces the principles of wastewater microbiology, characteristics of domestic and industrial wastewater, on-site disposal, municipal wastewater treatment systems, unite operations of pre-treatment, primary treatment, unit processes for secondary treatment, disinfection, and advanced wastewater treatment.

This Professional Land Surveyor Ethics course satisfies the continuing education requirement for all states. This PLS continuing education ethics course is designed as a distance learning interactive course that enables professional land surveyors to renew the emphasis that his or her professional license status gives recognition to the expert knowledge attained by the surveyor and grants privilege to practice the profession of surveying.

This PE license renewal continuing education course has been specifically written for professional engineers or other building professionals to learn the fundamentals of solar electric design, with an emphasis on rooftop solar. The PE will learn site analysis, material selection, budgets, and pro tips. Pay careful attention and the engineer will learn the steps needed to generate project permit documentation, specialty material lists including supply chain navigation, and even which general items might be bought at a local electrical supply store. Register for this PDH Now course today and start earning the PE continuing education credits you need.

This professional engineer license renewal PDH course presents the stabilization and solidification technologies being applied to the treatment of industrial wastes, the treatment of waste prior to secure landfill disposal, and the treatment of contaminated land where large quantities of soil containing contaminants are encountered. Take this PE online PDH course to learn how stabilization and solidification are physicochemical processes.

This one hour advanced internet based PDH course on Chapter 3, the General Regulations of the 2020 Florida Building Code on Plumbing provides an in depth review of the General Regulations of the Florida Building Code for Plumbing for Florida Professional Engineers who specialize in the design of plumbing systems under the Florida Building Code. The FBC 8th Edition is not effective until 12/31/2023, this 7th Edition course is approved for the 2023 Florida PE License Renewal.

What are the causes of air pollution and how can the professional engineer mitigate these causes? Anything people do that involves burning things (combustion), using household or industrial chemicals (substances that cause chemical reactions and may release toxic gases in the process), or producing large amounts of dust has the potential to cause air pollution. This PDH Engineering course provides a detailed review of the causes, sources, and controls of air pollution.

Become familiar with design parameters for wind loads that are applicable to the methodologies permitted in the Florida Building Code, Section 1609.

This Professional Engineer license renewal course presents the principles and practices of wastewater collection system. This PE PDH course will outline the preliminary sewer design issues, the hydraulic design of gravity and pressure sewers, sewer system layout, appurtenances, facilities act, regulatory stands, and permitting requirements, structural design of sewer lines, and the essential steps for sewer management and operation. This PE continuing education course will also discuss how to approach evaluation and rehabilitation of existing sewer systems. This PE professional development course is ideal for civil professional engineers and other design and construction professionals looking for an introduction to the design, operation, and maintenance of wastewater collection systems.

This professional engineer license renewal PDH course introduces an overview of solid waste landfill design, operation, and performance. This PE PDH course covers the materials related to Site Selection, Site Preparation, Equipment, Operation, Environmental Considerations, Bioreactor Landfill, Landfill Design, Completed Solid Waste Landfills, Solid Waste By-Products and their beneficial use. This PE continuing education course is suggested for civil engineers, environmental engineers, and solid and hazardous waste landfill managers and operators.

In this online PDH course, we examined key features of flood control and bank protection projects that worked over time and a number of those that faced challenges during their long life. Suggestions for improvement were made for many of the problems encountered. This continuing education course uses lessons learned over many years through the review of a very interesting long-term project and will satisfy all state requirements for your professional engineer license renewal.

The Professional Engineer license renewal course is designed to introduce Water Cycle, Watershed, Water Supply System Components, Water Supply Sources, Water Quality, Water Quantity, Distribution Systems, Water Quality Standards, Health Effects, Aesthetic Effects, Planning and Management of Water Supply Systems. This online PDH course defines and elaborates on water cycle, watershed, elements of water supply systems, distribution systems, effects on health and environment, as well as the engineering, planning and management of water supply systems. This PDH PE renewal course also solves a few problems to show the use of Darcy-Weisback equation, Hazen William’s Nomogram and energy equation to estimate the head loss and pressure at a certain point in a distribution system. This PE license renewal course is suggested for civil professional engineers, environmental professional engineers, and water and wastewater treatment plant managers and operators.

In this Professional Engineer online PDH course, we examined key features of flood control and bank protection projects that worked over time and a number of those that faced challenges during their long life. Suggestions for improvement were made for many of the problems encountered. This Floodwater Lessons Learned PE continuing education courses examines a case study in Socorro, NM involving a diversion channel project with the Army Corp of Engineers.

This advanced internet course based on Chapter 9, Florida Building Code – Building 7th Edition (2020) Fire Protection Systems offers an in depth or advanced study for the Florida Professional Engineer designing fire protection systems under the 2020 FBC code. Since the FBC 8th Edition does not take effect until 12/31/23 this course is approved for the 2023 Florida PE license renewal.

In this online PDH course, we examined key features of flood control and bank protection projects that worked over time and a number of those that faced challenges during their long life. Suggestions for improvement were made for many of the problems encountered. This PDH continuing education course for professional engineers reviews the lessons learned from an actual project executed in Creede, CO by the Army Corp of Engineers.

The Project Manager not only needs to know what to do, but also “how to do it” and what to do when a difficult situation presents itself. Invariably, the solution is not begun until the PM and/or the project team members recognize that a problem exists. It can then be resolved with training and experience, each of which is an equally valuable commodity.

This advanced PE PDH internet course is based on Chapter 16, 2023 Florida Building Code – Building, 8th Edition offers an in depth or advanced study for the Florida Professional Engineer designing building structures under the code. This course is updated to reflect the latest 8th edition of the Florida Building Code. The 8th edition of the FBC becomes effective 01/01/2024.

This online continuing education course introduces the student to fundamentals of welding and brazing, including an overview of welding procedure development. Welding and brazing variables are introduced along with some examples for applying each variable. The professional engineer license renewal PDH course is presented around the requirements of ASME Section IX.

This PE PDH course introduces the basics of water pollution and its control. The professional engineers learn about water pollutants and their sources and water pollution in rivers. More specifically the PE will be familiar with the definition, importance, and consequences of total maximum daily load (TMDL), effect of oxygen demanding wastes on rivers, Biochemical Oxygen Demand (BOD), Chemical Oxygen Demand (COD), graphical determination of BOD constants, laboratory measurements of BOD, dissolved oxygen (DO) sag curve, effects of nutrients on water quality in rivers. This course is suggested for civil engineers, environmental engineers, and water and wastewater treatment plant managers and operators.

This professional engineer PDH course introduces an overview of hazardous waste (HW) landfill design, operation, and performance. This online PDH course covers the materials related to Landfill Operations, Site Selection, Liner & Leachate Collection Systems, Final Cover Systems, Materials, Contaminant Transport through Landfill Barriers, Landfill Stability, Subsurface Impoundments and Deep Well Injection, Closure and Post-Closure Care. This PE license renewal PDH course is suggested for civil engineers, environmental engineers, and solid and hazardous waste landfill managers and operators.